ClearPath OS 2200 Series Release 13.2 Software Planning and ...

Installation
and Support
Name
Level
Logical
Tape
Name
Default
Installation
Mode
LA 7R6A CP18 A
OSAM 7R5 CP18 A
PAR 9R2 CP18 A
Installing from Package Tapes
Notes
TQ-BASELINE 7R4F CP18 A TQ-ONLINE and TQ-BASELINE are mutually exclusive.
TQ-ONLINE 7R4F CP18 A TQ-ONLINE and TQ-BASELINE are mutually exclusive.
TQD-FRAGGER 4R1D CP18 A
TQRDFRAGGER 4R1D CP18 A
TIP-LA 1R4E CP18 A
TQ-PMLOG 7R4B CP18 A
TQ-PROBES 7R4D CP18 A
22. Install your remaining products.
Notes:
• Use the SOLAR PKGREG Key Package Summary Report produced when the key
tape was registered to determine which products remain.
• See Appendix C for the tape names of these products.
7.7. Installing from Package Tapes
The following sequence is intended for those sites that are moving from ClearPath
OS 2200 Release 12.0 or higher to ClearPath OS 2200 Release 13.2 and choose to install
the products from package tapes. If you install the products in the exact order presented
here, you will avoid possible interdependency conflicts.
With this sequence, you install the first-load (CP-FLD) tape before building and booting
the Exec. While building your ClearPath OS 2200 Release 13.2 Exec, you must install any
separately packaged Exec features that your site has ordered from the CP-SPF tape.
Notes:
• This installation sequence uses the logical package name. See C.1 for more
information.
• Since every user database configuration can differ, it is strongly suggested that you
read the appropriate overview, planning, installation and configuration guides that
apply to your own environment. This installation suggests only the order the
products need to be installed.
7831 0349–043 7–15