ClearPath OS 2200 Series Release 13.2 Software Planning and ...

Software License Management and LIBSAVE/LIBLOAD
3.6.2. Example 1: Performing a LIBLOAD onto System B
This example is for LIBLOAD systems in the System B category. The system’s Image
Enabler key contains SCN information.
Note: In each step of this example, the table shows the status of the Image Enabler
keys for each system after the action is performed. The table also shows whether the
Image Enabler key is in compliance.
Perform the following steps:
1. Perform LIBSAVE from System A to save DATA$ information from System A.
Image Enabler
Keys
System A System B
Product
Key
Image Enabler
Keys
Product
Key
MCN1 SCN1 SCN1 MCN2 SCN2 SCN2 Yes.
In Compliance
Product key SCN matches new
format Image Enabler key SCN.
2. Perform LIBLOAD onto System B to load DATA$ information from System A onto
System B and replace System B key values with System A key values.
Image Enabler
Keys
System A System B
Product
Key
Image Enabler
Keys
Product
Key
MCN1 SCN1 SCN1 MCN1 SCN1 SCN1 No.
WARNING
In Compliance
Image Enabler key MCN does
not match hardware MCN.
Once the system’s Image Enabler key has been removed from the system,
you have 30 minutes to reregister the key. Warning messages will be
displayed on the system console.
7831 0349–043 3–25