1935 Cadillac - GM Heritage Center

Fisher Body Service Manual, 1935
REAR QUARTER WINDOW GLASS REMOVAL
(SEDAN)
1. Remove Garnish Molding. *
2. Release the Trim where tacked around Opening.
3. Remove the Screws holding the Window Metal Retainer
at the top, bottom and back.
4. Loosen the outside lip on Rubber Channel and remove
Assembly from inside.
ROOF BOW (SECOND BOW)
To Remove:
1. Remove Headlining back beyond the Bow.
2. Loosen Bow from Dome Lamp Board.
3. Remove Dome Lamp Wiring from Bow.
4. Remove 2 Bolts from each end of Bow and remove it.
ROOF BOW (REAR BOW)
Headlining Rear Supports
To Remove:
1. Remove Headlining back to Rear Window.
2. Loosen Dome Lamp Board.
3. Loosen Headlining Rear Supports from Back Window
Frame.
4. Remove bolts at each end of Bow.
5. Remove the Bow with Headlining Supports.
Illustration No. 96
Sedan Rear Quarter Window Glass Removal.
REAR QUARTER WINDOW GLASS
(COACH)
To Remove:
1. Remove Garnish Molding.
2. Remove Rear Seat Cushion and Cushion Back. (Pontiac,
Oldsmobile, LaSalle).
3. Loosen Lower Quarter Trim Pad and its Foundation
from the Opening.
4. Remove the upper section of Regulator Board.
5. Remove Glass Run Channel Upper.
6. Remove the two screws in each end of Glass Sash
Channel
7. Remove Glass.
Illustration No. 97
Side Roof Rail Filler Removal. -
ROOF SIDE RAIL FILLER
To Remove:
1. On a Coach, remove the Rear Quarter Window Frame.
On a Sedan, remove the Rear Quarter Window and Window
Frame.
2. Release the Headlining along the Roof Rail and back
eighteen inches on the Roof Bows.
3. Remove all bolts through Roof Rail Filler.
4. Remove Filler.
DOOR (FRONT)
To Remove:
1. Remove Slotted Sleeve Nut from rear side of Center Pillar
to release the Door Check Link.
2. Remove the Door Hinge Pins. (Tight Hinge Pins are
easily removed with Hinge Pin Removing Tool No. B-170.
3. Remove Door.
DOOR (REAR)
To Remove:
1. Loosen the Trim Pad on Door and remove the Nut and
Rubber from Link.
2. Remove the Hinge Pins.
3. Remove the Door.
ROOF BOW (FRONT BOW)
To Remove:
1. Remove Headlining back beyond the Bow.
2. Remove two bolts at each end of Bow.
3. Slide Bow at one end and remove it.
Illustration No. 98
Removing Side Roof Rail Fillers.
Page 30