Kawasaki Z1000 - ZR1000 2003-04 Service Manual - Small Engine ...

Not For Resale
www.SmallEngineDiscount.com
7-12 ENGINE LUBRICATION SYSTEM
Oil Pump
• Fit the pin [A] of the oil pump cover [B] into the hole [C] in
the crankcase.
• Install:
Pins [A]
Water Pump Body [B]
• Install:
Impeller [A] and Bolt [B]
• Tighten:
Torque - Water Pump Impeller Bolt: 10 N·m (1.0 kgf·m, 87
in·lb)
• Install:
Pins [C]
Water Pump Cover and Bolts
Torque - Water Pump Cover Bolts: 11 N·m (1.1 kgf·m, 95
in·lb)
• Install:
Water Pipes [A]
• Tighten:
Torque - Water Pipe Fitting Bolts [B]: 11 N·m (1.1 kgf·m, 95
in·lb)
• Install the water hose [C] so that the white mark faces
outward.
• Tighten:
Torque - Water Hose Clamp Screws [D]: 2.0 N·m (0.2 kgf·m,
17 in·lb)