Kawasaki Z1000 - ZR1000 2003-04 Service Manual - Small Engine ...

Not For Resale
www.SmallEngineDiscount.com
Battery
ELECTRICAL SYSTEM 16-23
Battery Removal
CAUTION
Do not disconnect the battery cables or any other
electrical connections when the ignition switch is
ON, as this could damage the ECU (Electronic Control
Unit).
Never reverse the connections of the battery, this
could damage the ECU.
• Remove:
Seats (see Frame Chapter)
Disconnect the negative (–) cable [A].
• Slide out the positive (+) terminal cap [B] and then disconnect
the positive (+) cable.
CAUTION
Be sure to disconnect the negative (–) cable first.
• Remove the battery.
Battery Installation
• Apply a light coat of grease on the terminals to prevent
corrosion.
Install the positive (+) cable [A] first.
Cover the (+) terminal with the cap [B].
• Install the negative (–) cable [C].
Electrolyte Filling
• Make sure that the model name [A] of the electrolyte container
matches the model name [B] of the battery. These
names must be the same.
Battery Model Name for ZR1000–A1 ∼ : YTX9–BS
CAUTION
Be sure to use the electrolyte container with the
same model name as the battery since the electrolyte
volume and specific gravity vary with the
battery type. This is to prevent overfilling of the
electrolyte, shorting the battery life, and deterioration
of the battery performance.