Kawasaki Z1000 - ZR1000 2003-04 Service Manual - Small Engine ...

Not For Resale
www.SmallEngineDiscount.com
16-72 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
• If the oscillator is not available, the tachometer can be
checked as follows.
○Connect the 12 V battery and terminals in the same manner
as specified in the "Liquid Crystal Display (LCD) Segments
Check".
○Using an auxiliary wire, quick open and connect the terminal
[1] to the terminal [7] repeatedly.
○Then the tachometer segment [A] should flick [B].
If the segment does not flick, replace the meter assembly.
LED Lights Inspection:
• Connect the 12 V battery and terminals in the same manner
as specified in the “Liquid Crystal Display (LCD) Segments
check.”
Neutral Indicator Light (LED) [A]
FI Indicator Light (LED) [B]
Oil Pressure Warning Indicator Light (LED) [C]
Right Turn Signal Indicator Light (LED) [D]
Left Turn Signal Indicator Light (LED) [E]
High Beam Indicator Light (LED) [F]
• Using the auxiliary leads, connect a 12 V battery to the
meter unit connector as follows.
Neutral Indicator Light (LED):
Battery Negative (–) Terminal To Terminal [5]
FI Indicator Light (LED):
Battery Negative (–) Terminal To Terminal [6]
Oil Pressure Warning Indicator Light (LED):
Battery Negative (–) Terminal To Terminal [11]