Kawasaki Z1000 - ZR1000 2003-04 Service Manual - Small Engine ...

Not For Resale
www.SmallEngineDiscount.com
10-12 WHEELS/TIRES
Wheels (Rims)
• When required total weight exceeds 20 g (0.71 US oz), install
balance weight at both sides of rim flange as shown.
Required Weight Selection: g (US oz)
Total Weight:
g(USoz)
OneSide[A] Other Side [B]
20 (0.71) 10 (0.35) 10 (0.35)
30 (1.06) 20 (0.71) 10 (0.35)
40 (1.41) 20 (0.71) 20 (0.71)
50 (1.76) 30 (1.06) 20 (0.71)
60 (2.12) 30 (1.06) 30 (1.06)
70 (2.47)
20 + 20
(0.71 + 0.71)
30 (1.06)
80 (2.82)
20 + 20 20 + 20
(0.71 + 0.71) (0.71 + 0.71)
90 (3.17)
20 + 30 20 + 20
(0.71 + 1.06) (0.71 + 0.71)
Balance Weight
Part Number
Weight (grams)
41075–1014 10
41075–1015 20
41075–1016 30
NOTE
○Balance weights are available from Kawasaki dealers
in 10, 20, and 30 grams (0.35, 0.71, and 1.06 US oz).
An imbalance of less than 10 grams (0.35 US oz) will
not usually affect running stability.
○Do not use four or more balance weight (more than 90
gram, 3.17 US oz). If the wheel requires an excess balance
weight, disassemble the wheel to find the cause.
• Install the balance weight on the rim.
○Slip the weight on the rim flange by pushing or lightly hammering
the weight in the direction shown in the figure.
Push or Hammer [A]
Rim Flange [B]
Tire Bead [C]
Blade [D]
○Check that the blade [A] and weight [B] seat fully on the
rim flange [C], and that the clip [D] is hooked over the rim
ridge [E] and reaches rim flat portion.