5ml User's Guide

CHAPTER 7: Working in the Project Editor
2. Click the HTML color code box at the left end of the gradient line to show the color picker.
3. Click inside the color picker to pick the starting color for the gradient, as shown in Figure 7-10 on page 164.
4. Drag the slider on the right side of the color picker to adjust the color component value (from saturated to black).
Figure 7-10: Picking the starting color for a linear gradient background for the page.
5. Click the HTML color code box at the right end of the gradient line to show the color picker.
6. Click inside the color picker to pick the ending color for the gradient.
7. Drag the slider on the right side of the color picker to adjust the color component value (from saturated to black).
8. Click one of the two gradient buttons underneath the gradient line to set the gradient to flow from top to bottom, as
shown in Figure 7-11 on page 165, or from side to side.
To experiment with the gradient, you can click the button to the right of the two gradient buttons to switch the starting and
ending colors of the gradient.
- 164 -