5ml User's Guide

5ml User's Guide
Figure 8-8: Rotating the Element Around the Z Axis.
Changing an Element's Skew Properties
You can skew an element (in degrees) on its X (horizontal) axis and Y (vertical) axis. To change the Skew X (horizontal
axis) and/or Skew Y (vertical axis) values (which are set to 0 by default), move the slider controls right or left, or enter
the values in degrees between -90 and 90.
Change the X Skew value to skew the element on its X axis. A positive value skews the element to the left and a negative
value skews the element to the right, as shown in Figure 8-9 on page 221.
Figure 8-9: Skewing the Element Around the X Axis and Y Axis.
- 221 -