5ml User's Guide

5ml User's Guide
Figure 3-32: Dragging the Image element (with its image) into position.
The image of the logo is in position, but it needs to appear behind the other images, and it needs to be transparent. To
modify the Image element:
1. Click on the Image element to select it (if it is not already selected).
2. Click the Send to Back button at the top of the Canvas, as shown in Figure 3-33 on page 58.
Send to Back places the Image element behind all other elements on the page. An overlapping element can
appear either in front of or behind another element depending on its position in the hierarchy of elements in the
Page Outline pane on the lower left side of the Project Editor. The Page Outline pane shows that the Image
element is now below the other elements in the hierarchy, which means it appears behind the other elements. You
can click the Move Forward, Move Backward, Bring to Front, and Send to Back buttons at the top of the Canvas (to
the left of the alignment buttons) to arrange the elements in the hierarchy. (For details on arranging elements, see
"Arranging and Overlapping Page Elements" on page 181
- 57 -