AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.12 Audio Map Ch2<br />
2.13 Audio Map Ch3<br />
2.14 Audio Map Ch4<br />
2.15 Audio Map Ch5<br />
2.16 Audio Map Ch6<br />
2.17 Audio Map Ch7<br />
2.18 Audio Map Ch8<br />
<strong>FS1</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> Manual — 2.12 Audio Map Ch2<br />
Note: If parameter 4.5 Audio Follow Video is set to On, then Audio Map Ch1<br />
selection is independently kept for each separate input: SDI 1, SDI 2, Composite, S-<br />
Video, <strong>and</strong> Component. If Audio Follow Video is set to Off, then another Audio Map<br />
Ch1 selection is used. This note applies to Parameters 2.11 through 2.18.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 2. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 2.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 3. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 3.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 4. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 4.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 5. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 5.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 6. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 6.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 7. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 7.<br />
This parameter is used with parameter 2.2—when Channel Map is selected—to<br />
specify the source of the audio output on channel 8. Possible choices are the same as<br />
parameter 2.11. Default = AES Ch 8.<br />
1<br />
39
Change language