AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
64<br />
37.1 GPI 1 OUT<br />
37.2 GPI 2 OUT<br />
The setting of this parameter determines what (if any) <strong>FS1</strong> event will generate a GPI<br />
trigger output at GPI 1, pin 3 on DE-9.<br />
37.1 GPI 1 OUT Description of Choices<br />
Parameter Adjustments:<br />
No Action (Default)<br />
Alarm<br />
No Video<br />
No Ref<br />
Vid In SDI1<br />
Vid In SDI2<br />
Vid In Cmpst<br />
Vid In S-Vid<br />
Vid In Cmpnt<br />
<strong>FS1</strong> does not trigger a GPI 1 output trigger regardless of event.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if an internal alarm condition occurs.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if no video is detected at its selected<br />
input.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if no video is detected at its Ref<br />
video input.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if SDI1 is selected as the main video<br />
input.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if SDI2 is selected as the main video<br />
input.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if Composite is selected as the main<br />
video input.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if S-Video is selected as the main<br />
video input.<br />
<strong>FS1</strong> generates a GPI 1 output trigger on pin 3 if Component is selected as the main<br />
video input.<br />
The setting of this parameter determines what (if any) <strong>FS1</strong> event will generate a GPI<br />
trigger output at GPI 2, pin 4 on DE-9.<br />
39.1 GPI 2 OUT Description of Choices<br />
Parameter Adjustments:<br />
No Action (Default)<br />
Alarm<br />
No Video<br />
No Ref<br />
Vid In SDI1<br />
Vid In SDI2<br />
Vid In Cmpst<br />
Vid In S-Vid<br />
Vid In Cmpnt<br />
<strong>FS1</strong> does not trigger a GPI 2 output trigger regardless of event.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if an internal alarm condition occurs.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if no video is detected at its selected<br />
input.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if no video is detected at its Ref<br />
video input.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if SDI1 is selected as the main video<br />
input.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if SDI2 is selected as the main video<br />
input.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if Composite is selected as the main<br />
video input.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if S-Video is selected as the main<br />
video input.<br />
<strong>FS1</strong> generates a GPI 2 output trigger on pin 4 if Component is selected as the main<br />
video input.
Change language