AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
21.0 Audio Output Phase<br />
<strong>FS1</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> Manual — 21.0 Audio Output Phase<br />
This parameter enables or disables individual audio phase adjustment of the eight <strong>FS1</strong><br />
audio output channels. When Adjust is selected, parameters 21.1 through 21.8 are<br />
then used to adjust phase for the eight channels.<br />
21.0 Audio Output Phase Description of Choices<br />
Parameter Adjustments:<br />
Normal (default)<br />
Adjust<br />
21.1 Audio Phase Ch1<br />
21.2 Audio Phase Ch2<br />
1<br />
Note: If parameter 4.5 Audio Follow Video is set to On, then Audio Output Phase<br />
selection is independently kept for each separate input: SDI 1, SDI 2, Composite, S-<br />
Video, <strong>and</strong> Component. If Audio Follow Video is set to Off, then another Audio Output<br />
Phase selection is used. This note applies to Parameters 21.0 through 21.8.<br />
This parameter selects whether audio phase is normal (same as passed from the input)<br />
or inverted on channel 1.<br />
21.1 Audio Phase Ch1 Description of Choices<br />
Parameter Adjustments:<br />
Normal (default)<br />
Invert<br />
21.3 Audio Phase Ch3<br />
21.4 Audio Phase Ch4<br />
Disable audio phase adjustments.<br />
Enable audio phase adjustments for the eight audio channels.<br />
Phase is unaltered as it passes from the input to the output.<br />
Phase is inverted as it passes from the input to output. (This may be useful to<br />
correct analog audio signals that are incorrectly wired, placing audio out of<br />
phase at input.)<br />
Note: If parameter 4.5 Audio Follow Video is set to On, then Audio Phase Ch1<br />
selection is independently kept for each separate input: SDI 1, SDI 2, Composite, S-<br />
Video, <strong>and</strong> Component. If Audio Follow Video is set to Off, then another Audio Phase<br />
Ch1 selection is used. This note applies to parameters 21.1 through 21.8.<br />
This parameter selects whether audio phase is normal (same as passed from the input)<br />
or inverted on channel 2. Parameter adjustments are the same as 21.1.<br />
This parameter selects whether audio phase is normal (same as passed from the input)<br />
or inverted on channel 3. Parameter adjustments are the same as 21.1.<br />
This parameter selects whether audio phase is normal (same as passed from the input)<br />
or inverted on channel 4. Parameter adjustments are the same as 21.1.<br />
57