AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
AJA FS1 Installation and Operation Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.5 Downconvert AFD Default<br />
<strong>FS1</strong> <strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> Manual — 5.5 Downconvert AFD Default<br />
This parameter selects how the <strong>FS1</strong> will operate when parameter 5.2 Downconvert<br />
Mode has been set to Auto AFD <strong>and</strong> no AFD codes are detected at the selected input<br />
source (i.e., selects which default downconversion to use when no AFD is present).<br />
5.5 Downcvt AFD Dflt Description of Choices<br />
Parameter Adjustments:<br />
Hold Last (Default)<br />
Letterbox<br />
14x9<br />
Anamorphic<br />
Crop<br />
Use the last AFD code detected <strong>and</strong> continue to use its aspect ratio selection until a<br />
new AFD code is detected again in the SDI meta data.<br />
When an AFD code isn’t present, switch the downconverter mode to Letterbox.<br />
When an AFD code isn’t present, switch the downconverter mode to 14x9.<br />
When an AFD code isn’t present, switch the downconverter mode to Anamorphic.<br />
When an AFD code isn’t present, switch the downconverter mode to Crop.<br />
1<br />
49