Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/012. HARDWARE2.13REPLACING THE LCDFUSEThis section describes the location and replacement of the LCD fuse.WARNINGBefore replacing a blown fuse, it is necessary to remove thecause of the blown fuse. For this reason, only the personnelwho have a working knowledge of maintenance and safetyare allowed to carry out this work. When replacing a fusewith the cabinet open, be careful not to touch thehigh–voltage circuit section (marked and shielded witha shock hazard prevention cover). If you touch thehigh–voltage circuit section when it is uncovered, you willget an electric shock. Fuse FS1LCD Unit (Rear view) (1)If the fuse blows, first find and eliminate the cause. Then, replace thefuse.(2)Pull the old fuse up.(3)Push a new fuse into the fuse holder.Ordering code : A02B–0200–K103 *Rating : 5.0 AIn–house code: A60L–0001–0290#LM50181