Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

More documents

Recommendations

Info

4. INTERFACE BETWEEN NC AND PMC B–62755EN/01 Divided display of ladderdiagramThis function is used for displaying the divided screen. It can displaymax. six division.For this operation, depress [WINDOW] soft key to bring the followingmenu.SEARCH ADRESS TRIGER WINDOWRETDIVIDE CANCEL DELETE SELECT WIDTHThe function of the soft key [WINDOW] is as follows:(1)[DIVIDE] : The screen will be divided.The dividing display of ladder diagram can bedisplayed for the designated NET number.(NET number+[DIVIDE])(2)[CANCEL] : The dividing display of ladder diagram display ends.(The screen returns to normal display.)(3)[DELETE] : The screen division subject to operation is ended.(4)[SELECT] : Change the screen subject to division operation.The screen in operation is displayed by ”purple” titleline, another screen is displayed by “blue” title line.In monochrome CRT, the screen is displayed bychanging brightness.(5)[WIDTH] : Change the width of division by using [EXPAND] or[SHRINK] soft key.(6)[EXPAND] : The divided screen is expanded.(7)[SHRINK] : The divided screen is shrank. ON–LINE EDITWhen bit 1 in the keep relay K17 is 1, this function is available and[ONLEDT] soft key is displayed.When the ladder program is executing, a part of the ladder program canbe changed. Change the type of contact (A contact, B contact) Change address of contact and coil. Change address parameter of functional instruction.This function don’t change the size.(Cannot be Addition, deletion and chanegable data size)When bit 3 in the keep relay K18 is 1, this program is automaticallytransferred to backup RAM after on–line edit.When bit 3 in the keep relay K18 is 0, transfer to backup RAM with COPYfunction of I/O screen. If power is off without this operation, edited datais lost.222
B–62755EN/014.INTERFACE BETWEEN NC AND PMC4.3.3PMCDGN SCREENPress soft key [PMCDGN] then PMC’s diagnostic screen is displayed. TITLE screenThe title data registered when a ladder program is prepared is displayed.Page numberPMC TITLE DATA #1PMC PROGRAM NO. :EDITION NO. :PMC CONTROL PROGRAMSERIES : 4063 EDITION : 08(SERIES : 4065 EDITION : 08)PMC TYPE CONTROL : RB3 PROGRAM : RB3MEMORY USED : KBLADDER : KBSYMBOL: KBMESSAGE: KBSCAN TIME : MSECSCAN MAX : 016 MS MIN : 008 MSTITLE STATUS ALARMTRACEMONIT RUNOther soft keysM.SRCHANALYS1st page PMC PROGRAM NO. :EDITION NO. :ÄÄÄÄÄ ÄÄÄÄÄÄ ÄÄÄÄpreparedPMC CONTROL PROGRAMSERIES : EDITION : Series and edition of PMCcontrol softwareMEMORY USED : KBLADDER : KB Memory used andSYMBOL : KB execution time isMESSAGE : KB displayed.SCAN TIME : MSECÄÄÄÄÄSet when PMCis2nd page MACHINE TOOL BUILDER NAME :MACHINE TOOL NAME :CNC & PMC TYPE NAME :PROGRAM DRAWING NO. :3rd page DATE OF DRAWING :PROGRAM DESIGNED BY :ROM WRITTEN BY :REMARKS :Set when PMCis prepared.ÄÄ223
Page 1:
GE Fanuc AutomationComputer Numeric
Page 4 and 5:
B-62755EN/01PREFACEPREFACEDescripti
Page 6 and 7:
B-62755EN/01PREFACERelated manualsT
Page 10 and 11:
B-62755EN/01 2.7 HOW TO REPLACE TH
Page 12:
B-62755EN/01 7. AC SPINDLE (ANALOG
Page 15 and 16:
B-62755EN/011DISPLAYAND OPERATION O
Page 17 and 18:
B-62755EN/011. DISPLAY AND OPERATIO
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
B-62755EN/012. HARDWARE2.1STRUCTURE
Page 107 and 108:
ÈÈÈÈÈÈÈÈÈÈÈÈÈÈÈÈÈ
Page 109 and 110:
B-62755EN/012. HARDWARE(Main CPU)SE
Page 111 and 112:
B-62755EN/012. HARDWARESCALE1 (JF21
Page 113 and 114:
B-62755EN/012. HARDWARE2) When the
Page 115 and 116:
B-62755EN/012. HARDWARE4) When the
Page 117 and 118:
B-62755EN/012. HARDWARE Terminal la
Page 119 and 120:
B-62755EN/012. HARDWARE3) For 14″
Page 121 and 122:
B-62755EN/012. HARDWARE2.4.2Reader/
Page 123 and 124:
B-62755EN/012. HARDWARE2.4.4I/O LIN
Page 125 and 126:
B-62755EN/012. HARDWARE Cable conne
Page 127 and 128:
B-62755EN/012. HARDWARE Connection
Page 129 and 130:
B-62755EN/012. HARDWARE2.4.6Connect
Page 131 and 132:
B-62755EN/012. HARDWARE Serial spin
Page 133 and 134:
B-62755EN/012. HARDWARE2.4.9Connect
Page 135 and 136:
B-62755EN/012. HARDWARE2.4.11Remote
Page 137 and 138:
B-62755EN/012. HARDWARE2.4.12High-s
Page 139 and 140:
B-62755EN/012. HARDWARE2.4.14Enviro
Page 141 and 142:
B-62755EN/012. HARDWARE GroundThe f
Page 143 and 144:
B-62755EN/012. HARDWARE Noise suppr
Page 145 and 146:
B-62755EN/012. HARDWARE2.5LED DISPL
Page 147 and 148:
B-62755EN/012. HARDWARE FuseFusesPo
Page 149 and 150:
B-62755EN/012. HARDWARE2.5.2Main CP
Page 151 and 152:
B-62755EN/012. HARDWARENo. Name Spe
Page 153 and 154:
B-62755EN/012. HARDWARE2.5.4Option
Page 155 and 156:
B-62755EN/012. HARDWARE Location of
Page 157 and 158:
B-62755EN/012. HARDWARE2.5.5Option
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
B-62755EN/012. HARDWARE2.5.9I/O Car
Page 165 and 166:
B-62755EN/012. HARDWARE2.5.11Backgr
Page 167 and 168:
B-62755EN/012. HARDWARE2.5.1264-bit
Page 169 and 170:
B-62755EN/012. HARDWARE2.6.3Control
Page 171 and 172:
B-62755EN/012. HARDWARE2.6.4Modules
Page 173 and 174:
B-62755EN/012. HARDWARE2.6.5CRT/MDI
Page 175 and 176:
B-62755EN/012. HARDWARENameSpecific
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
B-62755EN/012. HARDWARE2.7HOW TO RE
Page 183 and 184:
B-62755EN/012. HARDWARE2.8.1Replaci
Page 185 and 186: B-62755EN/012. HARDWARE2.8.3Replaci
Page 187 and 188: B-62755EN/012. HARDWARE(5)(4)Fan mo
Page 189 and 190: B-62755EN/012. HARDWARETable 1. Fus
Page 191 and 192: B-62755EN/012. HARDWARECleaning hea
Page 193 and 194: B-62755EN/012. HARDWARE2.12ADJUSTIN
Page 195 and 196: B-62755EN/012. HARDWARE2.13REPLACIN
Page 197 and 198: B-62755EN/013. INPUT AND OUTPUT OF
Page 225 and 226: B-62755EN/014.INTERFACE BETWEEN NC
Page 235: B-62755EN/014.INTERFACE BETWEEN NC
Page 249 and 250: ÀÀÀÀÀÀÀÀÀÀÀÀB-62755EN/0
Page 261 and 262: B-62755EN/015. DIGITAL SERVO5DIGITA
Page 263 and 264: B-62755EN/015. DIGITAL SERVO(2)MOTO
Page 265 and 266: B-62755EN/015. DIGITAL SERVO8) For
Page 267 and 268: B-62755EN/015. DIGITAL SERVO(8)No.
Page 269 and 270: B-62755EN/015. DIGITAL SERVOAlarm1#
Page 271 and 272: B-62755EN/015. DIGITAL SERVO5.3ADJU
Page 273 and 274: B-62755EN/015. DIGITAL SERVO5.4DOGL
Page 275 and 276: B-62755EN/016ACSPINDLE (SERIAL INTE
Page 277 and 278: B-62755EN/016. AC SPINDLE (SERIAL I
Page 287 and 288:
B-62755EN/016. AC SPINDLE (SERIAL I
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
B-62755EN/017. AC SPINDLE (ANALOG I
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
B-62755EN/018.TROUBLESHOOTING8TROUB
Page 311 and 312:
B-62755EN/018.TROUBLESHOOTING8.1COR
Page 313 and 314:
B-62755EN/018.TROUBLESHOOTING8.2POW
Page 315 and 316:
B-62755EN/018.TROUBLESHOOTINGMain C
Page 317 and 318:
B-62755EN/018.TROUBLESHOOTING(c) Co
Page 319 and 320:
B-62755EN/018.TROUBLESHOOTINGc. Jog
Page 321 and 322:
B-62755EN/018.TROUBLESHOOTING(3)Che
Page 323 and 324:
B-62755EN/018.TROUBLESHOOTINGc. Jog
Page 325 and 326:
B-62755EN/018.TROUBLESHOOTINGG0019#
Page 327 and 328:
B-62755EN/018.TROUBLESHOOTING8.6AUT
Page 329 and 330:
B-62755EN/018.TROUBLESHOOTINGG0005#
Page 331 and 332:
B-62755EN/018.TROUBLESHOOTINGf. Int
Page 333 and 334:
B-62755EN/018.TROUBLESHOOTINGi. NC
Page 335 and 336:
B-62755EN/018.TROUBLESHOOTING8.7CYC
Page 337 and 338:
B-62755EN/018.TROUBLESHOOTING8.8NOT
Page 339 and 340:
B-62755EN/018.TROUBLESHOOTING8.9ALA
Page 341 and 342:
B-62755EN/018.TROUBLESHOOTING0102 T
Page 343 and 344:
B-62755EN/018.TROUBLESHOOTING(c) Sp
Page 345 and 346:
B-62755EN/018.TROUBLESHOOTING< Cabl
Page 347 and 348:
B-62755EN/018.TROUBLESHOOTING8.10RE
Page 349 and 350:
B-62755EN/018.TROUBLESHOOTING(1)Che
Page 351 and 352:
B-62755EN/018.TROUBLESHOOTING8.13AL
Page 353 and 354:
Page 355 and 356:
ÇÇÇÇÇÇB-62755EN/018.TROUBLESH
Page 357 and 358:
Page 359 and 360:
B-62755EN/018.TROUBLESHOOTING Overh
Page 361 and 362:
B-62755EN/018.TROUBLESHOOTINGPower
Page 363 and 364:
Page 365 and 366:
B-62755EN/018.TROUBLESHOOTINGMove t
Page 367 and 368:
B-62755EN/018.TROUBLESHOOTING #6(LV
Page 369 and 370:
B-62755EN/018.TROUBLESHOOTING #4(HC
Page 371 and 372:
B-62755EN/018.TROUBLESHOOTING #2(DC
Page 373 and 374:
B-62755EN/018.TROUBLESHOOTING #1(FB
Page 375 and 376:
B-62755EN/018.TROUBLESHOOTING LED d
Page 377 and 378:
B-62755EN/018.TROUBLESHOOTING Curre
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
B-62755EN/018.TROUBLESHOOTING Optio
Page 385 and 386:
B-62755EN/018.TROUBLESHOOTINGRemedi
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
B-62755EN/018.TROUBLESHOOTING Main
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
B-62755EN/019. TROUBLESHOOTING (SER
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
B-62755EN/0110. TROUBLESHOOTING(ANA
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
B-62755EN/01APPENDIXA. I/O UNIT MOD
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
B-62755EN/01APPENDIXB. ALARM LISTBA
Page 433 and 434:
B-62755EN/01APPENDIXB. ALARM LISTNu
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
B-62755EN/01APPENDIXB. ALARM LIST(4
Page 453 and 454:
Page 455 and 456:
B-62755EN/01APPENDIXB. ALARM LIST(8
Page 457 and 458:
Page 459 and 460:
B-62755EN/01APPENDIXB. ALARM LISTB.
Page 461 and 462:
B-62755EN/01APPENDIXB. ALARM LISTMe
Page 463 and 464:
Page 467 and 468:
Page 469 and 470:
B-62755EN/01APPENDIXB. ALARM LISTAl
Page 471 and 472:
B-62755EN/01APPENDIXB. ALARM LISTB.
Page 473 and 474:
B-62755EN/01APPENDIXB. ALARM LIST M
Page 475 and 476:
B-62755EN/01APPENDIXC. LIST OF MAIN
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
B-62755EN/01APPENDIXD. BOOT SYSTEMD
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
B-62755EN/01APPENDIXD. BOOT SYSTEM
Page 501 and 502:
B-62755EN/01APPENDIXD. BOOT SYSTEM
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
B-62755EN/01ENOTATIONAPPENDIXOF MDI
Page 511 and 512:
B-62755EN/01Numbers16-TC/MC, 160-TC
Page 513 and 514:
B-62755EN/01INDEXMMain CPU board, 1
Page 515 and 516:
Revision RecordFANUC MAINTENANCE
show all

Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?