Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

1. DISPLAY AND OPERATION OF CRT/MDI B–62755EN/011.12LIST OF OPERATIONSResetFunctionDataprotectionkeyParameterwrite=1ModeFunctionbuttonOperationResetting run hour– POS[(OPRT)] [RUNPRE]→[EXEC]Resetting no. ofmachined parts – POS[(OPRT)] [PTSPRE]→[EXEC]Resetting OT alarmAt PowerON– P andCANResetting alarm 100– – CAN and RESETRegistration from MDIFunctionDataprotectionkeyParameterwrite=1ModeFunctionbuttonOperationInputtingparametersYesMDI orE.StopSYSTEM(PA-RAM)Parameter no.→[NO.SRH]→Data→→ PWE =0 →RESETINPUTInputting offsetvaluesOFF –OFFSETSETTINGOffset number→[NO.SRH]→Offset value→ INPUTInputting settingdataOFF MDIOFFSETSETTING Setting no.→[NO.SRH]Data→ INPUTInput of PMCparameters, counterand data tableInputting PMCparameters(Timer, keep relay)OFFOFFMDI orE.StopSYSTEM(PMC)[PMCPRM]→[COUNTR] or [DATA]→Data→ INPUT[PMCPRM]→[TIMER] or [KEEPRL]→Data→INPUTTool lengthmeasurementJOGPOS→POS→OFFSETSETTING(Display of relative coordinate)→ [ORIGIN]→Jog the tool to measuring positionOFFSETSETTINGOffset no.→[NO.SRH]→→[INP.C]82