Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/011. DISPLAY AND OPERATION OF CRT/MDI1.10.4Data Sampling forStorage TypeWaveform Diagnosis(1)Press the function key. Pressing the menu continuation key [ ]SYSTEMdisplays the [W.DGNS] soft key. Press this soft key to display theWAVE DIAGNOS. (PARAMETER) screen.(2)Press the [W.MEM] soft key to display the WAVE DIAGNOS.(MEMORY) screen. The operation selection soft keys appear.The configuration of the operation selection soft keys is as follows:WAVE DIAGNOS. (MEMORY)O1234 N12345CONDITION: 100 TRIGGER: G0123.4DATA KINDSPOS ERRORMOTION CMDCURRENT (%)SPEED (RPM)TORQUE CMDHEAT SIMLTSAMPLING AXISXYZABCUVXYZABCUVXYZABCUVNONENONEXYZABCUVSMPL TIME : 2. 0SECDATE : MEMORYEDIT **** *** *** 08:20:52[SELECT] [ ] [ ] [ ] [START](3)The configuration of the operation selection soft keys is asfollows:[W.PRM] [W.GRPH] [ W.MEM ] [ ] [ ]Press[SELECT] [ ] [ ] [ ] [START][ ] [ ] [PUNCH] [ ] [ ]Fig. 1.10.4 Soft keys(4)Using the cursor, set the necessary data items. To set the samplingaxes, position the cursor to the data item to be set, enter the names ofthe axes for which data will be sampled for that data item, then press[SELECT] ordata items.IN-PUT. The axis names are displayed to the right of theExample) XYZ + [SELECT] orIN-PUTOnce the sampling axes have been selected, the sampling period for eachaxis is displayed. Subsequently pressing the [START] soft key starts datasampling.75