Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

1. DISPLAY AND OPERATION OF CRT/MDI B–62755EN/01DGN513#7#6 #5 #4 #3 #2 #1 #0This data indicates the internal MMC–IV information.#4 For the VIDEO signal,1 : The CNC/PMC screen is selected.0 : The MMC screen is selected. Diagnostic data relatedto a small–diameter peckdrilling cycle (M seriesonly)DGN520 Total number of retractions during cutting after G83 is specifiedExecuting the G83 command clears the value to zero.DGN521Total number of retractions made by receiving the overload signal during cuttingafter G83 is specifiedExecuting the G83 command clears the value to zero.DGN522 Position on the drill axis from which retraction is startedThe units are the same as the minimum input increment.DGN523Difference between the position on the drill axis from which the previous retractionwas started and the position from which the current retraction is startedThe units are the same as the minimum input increment.64