Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/014.INTERFACE BETWEEN NC AND PMC4.3.2PMCLAD SCREENPress soft key [PMCLAD], and a sequence program is displayeddynamically and operation monitoring can be confirmed :Ladder displayNumber of net displayedRUN/STOP statusLADDER NET 0001–0004LOG1LOG1LOG1X008.4 *ESPEND1MONIT RUNALWAYS1EMERGENCYSTOPCommentPORDPORPOWER ONRESETTOP BOTTOM SRCHW–SRCHN–SRCHOther soft keysF–SCRHADRESSSYMBOLSwitched eachtime pressed Contents displayed Search method1. 1Green (Low brightness) displayContacts :open Relay :off2. White (High brightness) display Contacts : closed Relay : on1. Use the cursor keys or the page keys to changePAGEdisplay positions.2. [TOP]:Searches top of ladder.3. [BOTTOM]:Search bottom of ladder.4. Address.bit,[SRCH] or Signal name, [SRCH]5. Address.bit,[W–SRCH] or Signal name ,[W–SRCH]6. Net no.[N–SRCH]:Ladder is displayed from the specified net.7. Functional instruction no. [F–SRCH] or Functional instructionname[F–SRCH]8. [ADRESS]:Signal is displayed by address and bit no.9. [SYMBOL]:Signal is displayed by signal name (symbol).(If symbol is not registered at program preparation time, the addressof the signal is displayed).PAGE219