Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/018.TROUBLESHOOTING(c) Confirm the status of modesOperation mode status is displayed on the lower part of CRT asfollows :If nothing is displayed, mode select signal is not input. Check modeselect signal using PMC’s diagnostic function (PMCDGN).For details, refer to section 1.7 STATUS DISPLAY.G0043#7(Example of display)JOG : Manual operation (JOG) modeHND : Manual handle (MPG) modeMDI : Manual data input (MDI) modeMEM : Automatic operation (Memory) modeEDIT: EDIT (Memory edit) mode#6 #5 #4 #3 #2MD4#1MD2#0MD1↓ ↓ ↓Manual operation (JOG) mode 1 0 1Manual handle (MPG) mode 1 0 0Manual data input (MDI) mode 0 0 0Automatic operation (Memory) mode 0 0 1EDIT (Memory edit) mode 0 1 1(2)Check diagnostic data 000 to 025 of the CNC Check an item for which1 is displayedNo. Message Display000 WAITING FOR FIN SIGNAL : 0001 MOTION : 0002 DWELL : 0a.003 IN–POSITION CHECK : 0004 FEEDRATE OVERRIDE 0% : 0b.005 INTERLOCK / START LOCK : 1 (Example)006 SPINDLE SPEED ARRIVAL CHECK : 0010 PUNCHING : 0011 READING : 0012 WAITING FOR (UN) CLAMP : 0c.013 JOG FEEDRATE OVERRIDE 0% : 0d.014 WAITING FOR RESET, ESP, RRW OFF : 0015 EXTERNAL PROGRAM NUMBER SEARCH : 0Items with a to d relate with manual and automatic operation and itsdetail is shown below.303