Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

A. I/O UNIT MODEL A APPENDIXB–62755EN/01A.4FUSESThe following modules provide the corresponding protection fuses. If afuse blows for any reason , such as the short–circuiting of a cableconnected to a load, firt remove the cause of the problem, then replace thefuse.ModuleIndicationof whethera fuse hasblownParts number of fuseRatedcurrentAIF01A Interface module PWR off A60L–0001–0290#LM32 3.2AAIF01B Interface module PWR off A60L–0001–0290#LM32 3.2AA0D08C Output module(8 DC points)A0D08D Output module(8 DC points)A0A05E Output module(5 AC points)A0A08E Output module(8 AC points)A0A12F Output module(12 AC points)F on A60L–0001–0260#5R00 5AF on A60L–0001–0260#5R00 5AF on A60L–0001–0276#3.15 3.15AF on A60L–0001–0276#3.15 3.15AF on A60L–0001–0276#3.15 3.15AWARNINGBefore replacing a blown fuse, it is necessary to remove thecause of the blown fuse. For this reason, only the personnelwho have a working knowledge of maintenance and safetyare allowed to carry out this work. When replacing a fusewith the cabinet open, be careful not to touch thehigh–voltage circuit section (marked and shielded witha shock hazard prevention cover). If you touch thehigh–voltage circuit section when it is uncovered, you willget an electric shock.416