Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

4. INTERFACE BETWEEN NC AND PMC B–62755EN/014.3PMC SCREEN4.3.1Display Method1. Press SYSTEM .2. Press soft key [PMC], then PMC screen is displayed and the followingsoft keys are displayed:PMC CONTROL SYSTEM MENUMONIT RUNSELECT ONE OF FOLLOWING SOFT KEYSPMCLADPMCDGNPMCPRMRUN/STOPEDITI/OSYSPRMMONIT: DYNAMIC LADDER DISPLAY: DIAGNOSIS FUNCTION: PARAMETER (T/C/K/D): RUN/STOP SEQUENCE PROGRAM: EDIT SEQUENCE PROGRAM: I/O SEQUENCE PROGRAM: SYSTEM PARAMETER: PMC MONITORWhenbuilt–inprogrammeris running.PMCLAD PMCDGN PMCPRMSystem parameter screenStatus display of PMC I/O signalDynamic display of sequence programSTOP EDIT I/O SYSPRMMONITSystem parameter screenInput/output of sequence programEditing sequence programRUN/STOP of sequenceThe no. of menus to be displayed changes depending on presence/absence of built–in programmer.PMC–RB5/RB6(Without memorycard for editing)PMC–RB5/RB6(With memory cardfor editing)PMC–RC3/RC4RUN/STOP EDIT × I/O SYSPRM × × : Cannot be displayed nor used.218