Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

1. DISPLAY AND OPERATION OF CRT/MDI B–62755EN/011) The power–on time is displayed as shown below:92/01/20 ==== Year/Month/Day09:15:30 ==== Hour:Minute:Second2) The power–off time and the time when an NC alarm occurred aredisplayed in reverse video.92/01/20 ==== Year/Month/Day09:15:30 ==== Hour:Minute:SecondIf a system alarm occurs, the date and time are not recorded.3) At predetermined intervals, the clock time is displayed in reversevideo. Set the interval in minutes in parameter No. 3122. If zerois set, the time is stamped at ten–minute intervals.09:15:30 ==== Hour:Minute:SecondEach new calendar day is displayed in reverse video.92/01/20 ==== Year/Month/DayNOTEThe clock time is recorded for a specified interval only whendata is stored within that interval. Input signal or outputsignal to be recorded inthe operation history(1)P ress the SYSTEM function key.(2)Press the continue menu key [ ]. The [OPEHIS] (operation history)soft key is displayed.(3)Press the [OPEHIS] soft key, then press the [SG–SEL] soft key. Theoperation history signal selection screen is displayed.OP_HIS SIGNAL SELECTO1000 N02000No. ADDRES SIGNAL No. ADDRES SIGNAL01 X0000 00001000 11 G0000 0000000102 X0004 10000000 12 G0004 0000001103 X0008 00001100 13 G0008 0000011104 X0009 00111000 14 G0003 0000111105 X0012 00001111 15 G0043 0110000006 Y0000 01000000 16 ********07 Y0004 00110000 17 ********08 Y0007 00011100 18 ********09 Y0008 00011100 19 ********10 Y0010 00011100 20 ********>EDIT **** *** * * * 00:00:00[OPEHIS] [SG–SEL] [ ] [ ] [ (OPE) ]34