Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B. ALARM LIST APPENDIXB–62755EN/01MessageWN27 CODE SEG TYPE ERRORWN28 DATA SEG TYPE ERRORWN29 COMMON MEM SEGTYPE ERRORWN30 IMPOSSIBLE ALLOCATEMEM.WN31 IMPOSSIBLE EXECUTELIBRARYWN32 LNK CONTROL DATA ER-RORPC1nn CPU INTERPTxxxx yyyyyySTATUS LED PC130 RAM PARITYaa xxxx yyyyyySTATUS LED PC140 NMI BOC bb xxxx yyyyyySTATUS LED Contents and solutionThe code segment type is illegal. The code segment of RENAMESEG in the bindingcontrol file is wrong.(solution) Please correct the entry of the code segment in the link control statementto correspond to the entry in the build file.The data segment type is illegal. The data segment of RENAMESEG in the binding controlfile is wrong.(solution) Please correct the entry of the code segment in the link control statementto correspond to the entry in the build file.The segment type of common memory is illegal. The segment of RENAMESEG in thebuilding control file of the common memory is wrong.(solution) Please correct the entry of common memory in the link control statementto correspond to the entry in the build file.The memories for the data and stack etc. cannot be allocated.(solution) Please confirm whether the value of code segment in build file and USERGDT ADDRESS in link control statement is correct or not.Or please reduce the value of MAX LADDER AREA SIZE of the systemparameter and the size of the stack in link control statement at the leastThe library function cannot be executed.(solution) Please confirm the object model of the library.Or, system ROM of PMC must be replaced with one of later version.Link control statement data is illegal.(solution) Please confirm whether the address of symbol RC_ CTLB_INIT in map fileis set to LANGUAGE ORIGIN of the system parameter. Or, please makethe link control statement again.A CPU error (abnormal interrupt) occurred.nn : CPU exception handling codeIt is an exception code of i80386. For details, please refer to the manualof the CPU.00 Division error such as a divisor is 0 in division instruction.12 Stack exception such as violations of limit of stack segment.13 General protection exception such as segment limit over.xxxx : Segment selector where system error occurred.The selector of 0103–02FB is used by C language.yyyyyy : Offset address where system error occurred.Solution ) When C language is not used or when the cause is not found even if it ischecked C language, consult it.The parity error occurred on the debugging RAM of PMC.aa : RAM PARITY ERROR information.xxxx : Segment selector where system error occurred.yyyyyy : Offset address where system error occurredThe RAM parity error or NMI(Non Maskable Interrupt) generated in module of PMC engine.bb : RAM PARITY ERROR information.1, 2, 4, 8 Parity error occurred on basic DRAM.14,18 Parity error occurred on option DRAM.20,60,A0,E0 Parity error occurred on SRAM.xxxx : Segment selector where system error occurred.yyyyyy : Offset address where system error occurred.450