Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/014.INTERFACE BETWEEN NC AND PMC4.4LIST OF SIGNALS BYEACH MODE Automatic operationMODE INPUT/OUTPUT SIGNAL FEED RATE,ETCAUTOMATICOPERATIONEDITMEMMDIRMT[PMC ⇒ CNC]KEY3(Program protect key)[PMC ⇒ CNC)ST (Cycle start)*SP (Feed hold)SBK (Single block)DRN (Dry run)BDT1∼9 (Block delete)MIα (Mirror image)STLK (Start lock:16T/18T)CDZ (Chamfering:16T/18T)SMZ (In–position check:16T/18T)PN1∼8 (External program no. search)MINP (External program input)DNCI (DNC input mode)HSα1A∼D(Handle interrupt axis select)AFL (Auxiliary function neglect)FIN, MFIN2, MFIN3(Auxiliary function complete)MFIN, SFIN, TFIN, TFIN(High speed M/S/T function complete)GR1, 2 (Gear input 16T/ 18T)*SSTP (Spindle stop)SAR (Spindle speed arrival)SOR (Spindle orientation)[CNC ⇒ PMC]STL (Cycle start LED)SPL (Feed hold LED)MF, M00∼M31MF2, M200∼M215 (Miscellaneousfunction)MF3, M300∼M315SF, S00∼S31 (Spindle speed function)TF, T00∼T31 (Tool function)BF, B00∼B31 (2nd miscellaneous func.)DEN (Distribution end)OP (automatic operating)GR1O∼GR3O(Gear selection:16M/18M)[PMC ⇒ CNC]*FV0∼7(Feed rate override)*AFV0∼7(2nd feed rateoverride)OVC(Override cancel)ROV1,ROV2,HROV,*HROV0∼6(Rapid traverseoverride)SOV0∼7(Spindle speedoverride)237