Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/011. DISPLAY AND OPERATION OF CRT/MDI1.10.3Graphic of WaveDiagnosis data1. Press soft key [W.GRPH], then graph of waveform diagnosis isdisplayed.WAVE DIAGNOSE (GRAPHIC)CH1CH21.00.50–0.5–1.01.00.50–0.5–1.0[START] [TIME] [TIME] [H–DOBL] [H–HALF]2. Press soft key [(OPRT)], then the following soft keys are displayed.The following three sets of soft keys are displayed by the key.[START] [TIME] [TIME] [H–DOBL] [H–DOBL][START] [CH–1] [CH–1] [V–DOBL] [V–HALF][START] [CH–2] [CH–2] [V–DOBL] [V–HALF]1) [START ] : Starts Graphic data2) [TIME→] : Shift the waveform of channel 1 and 2 rightward3) [←TIME] : Shift the waveform of channel and 2 leftward4) [H–DOBL] : Double the time scale of the waveform of channel 1and 25) [H–HALF] : Half the time scale of the waveform of channel 1 and 26) [H–DOBL] : Double the height of waveform of channel 1 and 27) [V–HALF] : Half the height of waveform of channel 1 and 28) [CH–1↑] : Shift the zero point of channel 1 upward9) [CH–1↓] : Shift the zero point of channel 1 downward10) [CH–2↑] : Shift the zero point of channel 2 upward11) [CH–2↓] : Shift the zero point of channel 2 downward Drawing a waveform forone–shot type waveformdiagnosisThe one–shot type waveform diagnosis function draws a waveform for aspecified data item in real time as the data is sampled. The sampled data,however, is not stored and thus cannot be output later.To sample data for one–shot type waveform diagnosis, press the[START] key on the WAVE DIAGNOS. (GRAPHIC) screen. Then, datais sampled when the specified start condition is satisfied. Data samplingcontinues for the specified period.73