Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/016ACSPINDLE (SERIAL INTERFACE)6. AC SPINDLE (SERIAL INTERFACE)This chapter describes the parameter tuning screen of serial interfacespindle amplifier.6.1 GENERAL OF SPINDLE CONTROL(SERIAL* INTERFACE) . . . . . . . . . . . . . . . . . . . . . . 2626.2 TABLE OF TEST POINTS . . . . . . . . . . . . . . . . . . . . . 2646.3 CONFIRMING POWER SUPPLY(SERIAL INTERFACE) . . . . . . . . . . . . . . . . . . . . . . . 2676.4 SPINDLE SETTING AND TUNING SCREEN . . . . . 2706.5 AUTOMATIC SETTING OF STANDARDPARAMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278On the serial interface spindle amplifier, the following specificationnumber is printed on upper part of the spindle unitA06B–6063–Hxxx orA06B–6064–Hxxx orA06B–6065–Hxxx(xxx is any)Refer to the following manuals for maintenance of FANUC ACSPINDLE MOTOR α series :1) FANUC CONTROL MOTOR α series MAINTENANCE MANUAL(B–65165E)2) FANUC AC SPINDLE MOTOR α series PARAMETER MANUAL(B–65160E)261