10.07.2015 Views

Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

B–<strong>62755EN</strong>/01PREFACEPREFACEDescription ofthis manual1.CRT/MDI display and operationThis chapter covers those items, displayed on the CRT, that are related tomaintenance. A list of all supported operations is also provided at the endof this chapter.2.HardwareThis chapter covers hardware–related items, including the hardwareconfiguration, connection, and NC status indicated on printed circuitboards. A list of all units is also provided as well as an explanation of howto replace each unit.3.Data input/outputThis chapter describes the input/output of data, including programs,parameters, and tool compensation data, aswell as the input/outputprocedures for conversational data.4.Interface between the NC and PMCThis chapter describes the PMC specifications, the system configuration,and the signals used by the PMC.5.Digital servoThis chapter describes the servo tuning screen and how to adjust thereference position return position.6.and 7. AC spindlesThese chapters describe the spindle amplifier checkpoints, as well as thespindle tuning screen.8.Trouble shootingThis chapter describes the procedures to be followed in the event ofcertain problems occurring, for example, if the power cannot be turned onor if manual operation cannot be performed. Countermeasures to beapplied in the event of alarms being output are also described.9.and 10. Spindle trouble shootingThese chapters explain the alarms related to spindles, as well as thecorresponding countermeasures to be applied.APPENDIXThe appendix consists of a list of all alarms, as well as a list ofmaintenance parts. The I/O Unit–MODEL A is also described.This manual does not provide a parameter list. If necessary, refer to theseparate PARAMETER MANUAL (B–62760EN) .

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!