Series 16/18/160/180-Model C Maintenance Manual, GFZ-62755EN ...

B–62755EN/013. INPUT AND OUTPUT OF DATA0102 pecification number of input/output device0 RS–232–C (control codes DC1 to DC4 used)1 FANUC bubble cassette B1/B22 FANUC Floppy cassette adapter F13 PROGRAM FILE Mate. FANUC FA card adapter ,FANUCFloppy cassette adapter, FSP–H4 Not used5 Portable tape reader6 FANUC PPR, FSP–G, FSP–H0103 Baud Rate1: 50 5: 200 9: 24002: 100 6: 300 10: 48003: 110 7: 600 11: 96004: 150 8: 1200 12: 19200 [BPS]3.2.2Outputting CNCParametersIn case of PPR, steps 2 and 3 are not required.1. Select EDIT mode.2. PROG Press PROG key and soft key PRGRM to select a program text.3. Press soft key [(OPRT)] and soft key .And then, put out the head of file by pressing [FSRH] 0[EXEC].4. Press SYSTEM key and soft key [PARAM] to display parameter screen.5. Press soft key [(OPRT)] ,and soft key .6. Press soft key [PUNCH] and [EXEC],and the parameters are startedto be output.187