B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

FiguresLocating the backup battery tab 5–7Reinstalling the trim hole inserts and bushings 5–8Feeding the wire harness connectors through the harness hole 5–9Making the motor connection and sensor connections 5–10Securing the escutcheons 5–11Reinstalling the battery pack (four-cell pack shown) 5–12Reinstalling the battery door (four-cell door shown) 5–13Removing and reinstalling the mounting plates 5–14Removing and reinstalling the core 5–15Removing and reinstalling the mortise case faceplate 5–16Removing and reinstalling the cylinder 5–17SERVICING STANDARD MORTISE CASE PARTSRemoving and reinstalling the mortise case 6–2Explanation of the hand and bevel of the door 6–3Motor module and locking bar in place 6–7Turning over the auxiliary bolt 6–8Latchbolt with anti-friction latch lever in position 6–9Removing and reinstalling the motor module 6–14Positioning the turn knob hub and deadbolt spring 6–18Removing and reinstalling the cylinder clamp plate 6–19SERVICING CYLINDRICAL PARTSRemoving the core and throw member 7–2Reinstalling the core and throw member 7–2Removing the keyed lever 7–3Removing the plain lever 7–3Reinstalling the levers 7–4Removing the battery door (four-cell door shown) 7–5Removing the battery pack (four-cell pack shown) 7–6Removing the escutcheon 7–6Disconnecting the motor connector 7–7Removing the bushings, trim hole inserts, and hub washers 7–7Locating the backup battery tab 7–8Reinstalling the bushings, trim hole inserts, and hub washers 7–9Feeding the wire harness connectors through the harness hole 7–10Connecting the motor connector 7–11Securing the escutcheons 7–12Reinstalling the battery pack (four-cell pack shown) 7–13Reinstalling the battery door (four-cell door shown) 7–14xiiB.A.S.I.S. G Service Manual