B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Servicing Exit Hardware Trim PartsSERVICING THE COREPerform these steps for EV function locks only.Note: For a description of lock functions, see page 3–2.Removing the core1. Insert the control key into the core and rotate the key 15 degrees tothe right.2. Remove the core from the cylinder.CylinderCoreControl keyFigure 8.5Removing and reinstalling the coreOutside of doorReinstallingthe coreCaution1. Insert the control key into the core and rotate the key 15 degrees tothe right.2. With the control key in the core, insert the core into the cylinder asshown in Figure 8.5.3. Rotate the control key 15 degrees to the left and withdraw the key.The control key can be used to remove cores and to access doors.Provide adequate security for the control key.B.A.S.I.S. G Service Manual 8–9