B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

More documents

Recommendations

Info

Servicing Exit Hardware Trim PartsSERVICING THE EXIT HARDWARERemoving the exithardwareReinstalling the exithardwareCaution1. Remove the following parts:■ battery cover (page 8–2)■ battery pack (page 8–4)■ battery bracket (page 8–6).2. Remove the exit hardware (lock stile case, case cover, touch barassembly, and related hardware); follow the instructions providedby the exit hardware manufacturer.Note: The B.A.S.I.S. escutcheon is secured on the outside of the doorby the screws used to mount the lock stile case on the inside of thedoor.1. Reinstall the exit hardware (lock stile case, case cover, touch barassembly, and related hardware); follow the instructions providedby the exit hardware manufacturer.Note: Make any adjustments to the exit hardware necessary forcompatibility with lever function outside trim.When securing the B.A.S.I.S. escutcheon, make sure that it does notpinch the wire harness.2. Reinstall the following parts:■ battery bracket (page 8–7)■ battery pack (page 8–5)■ battery cover (page 8–3).8–8 B.A.S.I.S. G Service Manual
Servicing Exit Hardware Trim PartsSERVICING THE COREPerform these steps for EV function locks only.Note: For a description of lock functions, see page 3–2.Removing the core1. Insert the control key into the core and rotate the key 15 degrees tothe right.2. Remove the core from the cylinder.CylinderCoreControl keyFigure 8.5Removing and reinstalling the coreOutside of doorReinstallingthe coreCaution1. Insert the control key into the core and rotate the key 15 degrees tothe right.2. With the control key in the core, insert the core into the cylinder asshown in Figure 8.5.3. Rotate the control key 15 degrees to the left and withdraw the key.The control key can be used to remove cores and to access doors.Provide adequate security for the control key.B.A.S.I.S. G Service Manual 8–9
Page 1 and 2:
SERVICE MANUALSERVICE MANUAL
Page 3 and 4:
CONTENTSFIGURESXIGETTING STARTED 1-
Page 5 and 6:
ContentsSERVICING STANDARD MORTISE
Page 7 and 8:
ContentsServicing the cylinder 8-10
Page 9 and 10:
ContentsServicing the yoke 10-20Rem
Page 11 and 12:
FIGURESGETTING STARTEDSystem overvi
Page 13 and 14:
FiguresRemoving the inside rose lin
Page 15 and 16:
FiguresB.A.S.I.S. Transport Diagnos
Page 17 and 18:
1 GETTING STARTEDINTRODUCTIONThe B.
Page 19 and 20:
Getting StartedPersonal computer ru
Page 21 and 22:
Getting StartedCERTIFICATIONS AND S
Page 23 and 24:
Getting StartedDocument TitleG09 In
Page 25 and 26:
2 STANDARD FUNCTIONS ANDPARTSThe fo
Page 27 and 28:
Standard Functions and PartsLV-Dead
Page 29 and 30:
B.A.S.I.S. G Service Manual 2-5TRIM
Page 31 and 32:
Standard Functions and PartsItem Pa
Page 33 and 34:
Standard Functions and PartsSmart c
Page 35 and 36:
B.A.S.I.S. G Service Manual 2-11DUA
Page 37 and 38:
Standard Functions and PartsItem Pa
Page 39 and 40:
Standard Functions and PartsMortise
Page 41 and 42:
Standard Functions and PartsOther m
Page 43 and 44:
Standard Functions and PartsCylindr
Page 45 and 46:
3 EXIT HARDWARE TRIMFUNCTIONS AND P
Page 47 and 48:
B.A.S.I.S. G Service Manual 3-3TRIM
Page 49 and 50:
Exit Hardware Trim Functions and Pa
Page 51 and 52:
Page 53 and 54:
B.A.S.I.S. G Service Manual 3-9DUAL
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
4 SHARED STANDARD AND EXITHARDWARE
Page 61 and 62:
Shared Standard and Exit Hardware T
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
OTHER SYSTEM COMPONENTSOther system
Page 71 and 72:
5 SERVICING STANDARDMORTISE TRIM PA
Page 73 and 74:
Servicing Standard Mortise Trim Par
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84: Servicing Standard Mortise Trim Par
Page 89 and 90: 6 SERVICING STANDARDMORTISE CASE PA
Page 91 and 92: Servicing Standard Mortise Case Par
Page 109 and 110: 7 SERVICING CYLINDRICAL PARTSThis c
Page 111 and 112: Servicing Cylindrical PartsSERVICIN
Page 115 and 116: Servicing Cylindrical Partsb. Remov
Page 117 and 118: Servicing Cylindrical Parts2. Insta
Page 119 and 120: Servicing Cylindrical Parts4. Conne
Page 121 and 122: Servicing Cylindrical PartsCautionC
Page 125 and 126: Servicing Cylindrical Parts6. Tight
Page 127 and 128: 8 SERVICING EXIT HARDWARETRIM PARTS
Page 129 and 130: Servicing Exit Hardware Trim PartsR
Page 133: Servicing Exit Hardware Trim PartsR
Page 139 and 140: Servicing Exit Hardware Trim PartsS
Page 141 and 142: 9 SERVICING STANDARDOUTSIDE ESCUTCH
Page 143 and 144: Servicing Standard Outside Escutche
Page 167 and 168: 10 SERVICING EXIT HARDWARETRIM ESCU
Page 169 and 170: Servicing Exit Hardware Trim Escutc
Page 185 and 186:
Servicing Exit Hardware Trim Escutc
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
11 MAINTENANCEThis chapter includes
Page 199 and 200:
MaintenanceReinstalling thebackup b
Page 201 and 202:
MaintenanceInside escutcheonBattery
Page 203 and 204:
Maintenance4. Use a T15 TORX bit dr
Page 205 and 206:
MaintenanceReinstalling thebattery
Page 207 and 208:
Maintenance6. For B.A.S.I.S. mortis
Page 209 and 210:
MaintenancePERFORMING DIAGNOSTICS U
Page 211 and 212:
MaintenancePDASerial cableCommunica
Page 213 and 214:
MaintenanceNote: To perform other a
Page 215 and 216:
MaintenanceUnlocking a doortemporar
Page 217 and 218:
12 TROUBLESHOOTINGThis chapter cont
Page 219 and 220:
TroubleshootingENABLING COMMUNICATI
Page 221 and 222:
Troubleshooting8. For standard lock
Page 223 and 224:
TroubleshootingRESPONDING TO PROBLE
Page 225 and 226:
TroubleshootingLEDs Sounder Access
Page 227 and 228:
TroubleshootingWhen communicatingbe
Page 229 and 230:
A LOCK HISTORY EVENT TYPESThe follo
Page 231 and 232:
Lock History Event TypesEventREADER
Page 233 and 234:
B INSTALLATION INSTRUCTIONSThe foll
Page 235 and 236:
Planning the installationContentsTh
Page 237 and 238:
Preparing the door and door jamb3 M
Page 239 and 240:
Preparing the door and door jambIns
Page 241 and 242:
Installing the lock9 Install core (
Page 243 and 244:
Installing the lockInstallation Ins
Page 245 and 246:
Page 247 and 248:
Completing the installationInstalla
Page 249 and 250:
Completing the installation20 Test
Page 251 and 252:
Planning the installationInstallati
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Installing the lock13 Make motor co
Page 261 and 262:
Completing the installation17 Insta
Page 263 and 264:
Planning the installationContentsTh
Page 265 and 266:
Preparing the doorInstallation Inst
Page 267 and 268:
Preparing the doorInstallation Inst
Page 269 and 270:
Installing the exit hardware and tr
Page 271 and 272:
Installing the exit hardware and tr
Page 273 and 274:
Completing the installationInstalla
Page 275 and 276:
C INDEXAadding key override sensing
Page 277 and 278:
IndexLlatch 2-20latch leverpart dra
Page 279 and 280:
Indextechnical documentation packag
show all

B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?