12.07.2015 Views

B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TroubleshootingVISUAL AND AUDIBLE RESPONSE QUICK REFERENCEThe table below summarizes the visual and audible responses forstandard B.A.S.I.S. Locks and for EX Series Exit Hardware Trim. Seepage 12–7 for complete troubleshooting details.Green LED Red LED Sounder Meaning2 flashes ––– ––– Prompt to enter the new PIN during PINprogramming mode, or prompt to use a second cardand/or PIN during two card and/or PIN control.3 flashes ––– ––– <strong>Access</strong> is granted.3 slow flashes ––– ––– Passage mode is granted.3 slow flashes ––– 3 long tones Battery is low (warning).Stays on ––– ––– Door is in communication mode.––– 3 flashes 3 short tones <strong>Access</strong> is denied.––– Stays on ––– PIN programming mode is active, or the lock is busyafter communication mode has ended.3 flashes 3 flashes 3 short tones Battery is very low (alarm).4 flashes 4 flashes 4 short tones Lock performed an internal reset.––– ––– 3 long tones Lock timed out and is waiting for an action.––– ––– 3 short tones Bad data was presented to the reader.12–2 B.A.S.I.S. G <strong>Service</strong> <strong>Manual</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!