B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

MaintenanceADDING KEY OVERRIDE SENSING TO STANDARD B.A.S.I.S. MORTISE LOCKSYou can add key override sensing to a FV or EV function B.A.S.I.S.Mortise Lock that was:■■ordered without the key override sensing option, orupgraded from a V Series Mortise lock.Note: For a description of lock functions, see page 2–2.Order the following parts and perform the tasks below:■ sensor harness kit, part number 1833728■ sensor module with deadbolt and key override kit (FV function), partnumber 1833885, or■ sensor module with key override kit (EV function), partnumber 1833927.1. Remove the inside and outside trim from the door (page 5–3).2. If the lock has a sensor harness, remove it. See Figure 11.9. Forcomplete instructions, see page 9–6.3. Connect the new sensor harness. For complete instructions, seepage 9–6.Electronics boardSensor harnessOutside escutcheonFigure 11.9Connecting the sensor harness to the electronics board4. Remove and open the mortise case. For complete instructions,see page 6–2.5. Remove the latch lever. See Figure 11.11.11–10 B.A.S.I.S. G Service Manual