B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Maintenance2. Start B.A.S.I.S. Transport.On the PDA, tap Start, then Programs, then BAS, then Transport.The Main window appears, as shown in Figure 11.15.Figure 11.15 Starting B.A.S.I.S. Transport3. From the B.A.S.I.S. Transport Main window on the PDA, tap View,then Diagnostics.The Diagnostics window appears, with the fields blank.4. Tap Diagnostics, then Connect.The Login window appears.5. Enter the lock’s password in the Enter Password field.For instructions to use the PDA’s virtual keyboard, see thedocumentation provided with the PDA.Note: The password for a lock is the password programmed for thereader configuration’s access control panel. You must enter thepassword exactly as it was entered in the Password field on theOffline Lock form in the Access Panels folder. Capitalization must bethe same.6. Tap OK.A message appears stating, “Attempting login... Please swipe acard...”.7. Use the temporary operator card to activate the lock.The diagnostics information appears on the PDA, as shown inFigure 11.12 on page 11–13.11–16 B.A.S.I.S. G Service Manual