B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

ContentsSERVICING STANDARD MORTISE TRIM PARTS 5–1Servicing the levers 5–2Removing the levers 5–2Reinstalling the levers 5–2Servicing the inside and outside escutcheons 5–3Removing the inside and outside escutcheons 5–3Reinstalling the inside and outside escutcheons 5–6Servicing the mounting plates 5–14Removing the mounting plates 5–14Reinstalling the mounting plates 5–14Servicing the core 5–15Removing the core 5–15Reinstalling the core 5–15Servicing the mortise case faceplate 5–16Removing the mortise case faceplate 5–16Reinstalling the mortise case faceplate 5–16Servicing the cylinder 5–17Removing the cylinder 5–17Reinstalling the cylinder 5–17SERVICING STANDARD MORTISE CASE PARTS 6–1Servicing the mortise case 6–2Removing and opening the mortise case 6–2Closing and reinstalling the mortise case 6–2Changing the hand and bevel 6–3Changing hand and bevel quick reference 6–3Changing the hand only 6–5Changing the bevel only 6–5Changing the hand and bevel 6–5Tasks for changing the hand and bevel 6–6Turning over the hubs 6–6Turning over the cylinder clamp plate 6–7Turning over the auxiliary bolt 6–8Turning over the latchbolt 6–9Function conversion 6–10Removing key override 6–10Adding key override 6–11Adding a deadbolt 6–12Removing a deadbolt 6–12Servicing parts in the mortise case 6–14Servicing the motor module 6–14Removing the motor module 6–14Reinstalling the motor module 6–15B.A.S.I.S. G Service Manualv