B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Servicing Standard Mortise Trim Partsd. Remove the bushings and trim hole inserts (for locks with brassescutcheons) from each side of the door.Trim hole insertsBushingsFigure 5.6Removing the bushings and trim hole insertse. Remove the outside escutcheon from the door, feeding themotor connector and sensor connectors out the harness hole.CautionReinstalling theinside and outsideescutcheonsCautionCautionWhen removing the outside escutcheon, make sure that the harnessesare not rubbed across any sharp edges or over any surface that coulddamage their sleeving or wire insulation.1. Activate the backup battery:If you are reinstalling the outside escutcheon, go to Step 2.If you are installing a new outside escutcheon, perform thesesteps:a. Locate the backup battery tab on the inside of the outsideescutcheon.b. Pull down on the tab and remove it from the outside escutcheonto turn on the backup battery.For the lock to operate properly, you must remove the backup batterytab.Do not connect the battery pack before you have removed the backupbattery tab. Doing so may cause the lock to malfunction.5–6 B.A.S.I.S. G Service Manual