B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Servicing Standard Outside Escutcheon PartsSERVICING THE LENS COVERSA replacement kit is available for the lens covers. See page 4–6.Removing the lenscovers1. Remove the following parts:■ inside and outside escutcheons. For mortise lock instructions, seepage 5–3. For cylindrical lock instructions, see page 7–5.■ escutcheon gasket (page 9–2).2. Pry the lens covers off the top of the outside escutcheon.Location of the lens coverLocation of the lens coverRetaining ringRetaining ringFigure 9.2Removing and reinstalling the lens covers (smart card reader shown)Reinstalling the lenscovers1. Insert the lens covers into the holes in the top of the outsideescutcheon.2. On the inside of the escutcheon, slide the retaining rings up andaround the ends of the lens covers.3. Reinstall the following parts:■ escutcheon gasket■ inside and outside escutcheons. For mortise lock instructions, seepage 5–6. For cylindrical lock instructions, see page 7–8.B.A.S.I.S. G Service Manual 9–3