B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Servicing Standard Mortise Trim PartsSERVICING THE COREPerform these steps for EV and FV function locks only.Note: For a description of lock functions, see page 2–2.Removing the core1. Insert the control key into the core and rotate the key 15 degrees tothe right.2. Remove the core from the cylinder.CylinderCoreControl keyInside of doorFigure 5.15Removing and reinstalling the coreReinstallingthe core1. Insert the control key into the core and rotate the key 15 degrees tothe right.2. With the control key in the core, insert the core into the cylinder.3. Rotate the control key 15 degrees to the left and withdraw the key.The control key can be used to remove cores and to access doors.Provide adequate security for the control key.Caution4. Reinstall the following parts:■ escutcheons (page 5–6)■ levers (page 5–2).B.A.S.I.S. G Service Manual 5–15