B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

10 SERVICING EXIT HARDWARETRIM ESCUTCHEON PARTSThis chapter contains instructions for servicingEX Series Exit Hardware Trim escutcheon parts forB.A.S.I.S. G EX Series Exit Hardware Trim. Forinstructions for servicing standard B.A.S.I.S. outsideescutcheon parts, see page 9–1.■■■■To remove all of the parts from the B.A.S.I.S.escutcheon, perform all of the steps for removingparts in each section of this chapter. Begin withthe mounting standoffs (page 10–2).To reinstall all of the parts in the B.A.S.I.S.escutcheon, perform all of the steps forreinstalling parts in each section of this chapter.Begin with the shear pin (page 10–27).To change the handing for the B.A.S.I.S.escutcheon, see page 10–28.To service an individual part, see the section forthat part. The instructions refer to other sectionsas necessary.If you need to service…See…Mounting standoffs page 10–2Escutcheon gasket page 10–3Lift finger page 10–4Mounting plate page 10–6Lever return springs page 10–8Lens covers page 10–9Primary harness page 10–9B.A.S.I.S. G Service Manual 10–1