B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Servicing Standard Mortise Trim PartsSERVICING THE LEVERSRemoving the levers1. Remove the set screw cap and use a 1/8″ Allen wrench to removethe set screw from the inside lever.2. Remove the inside lever, then the outside lever and spindleassembly from the door.Location of set screwFigure 5.1Outside of door Spindles Inside of doorRemoving and reinstalling the leversReinstalling thelevers1. Unscrew the inside spindle one full turn to allow the spindles toturn freely.2. With the handle pointing toward the door hinges, insert the outsidelever and spindles assembly into the lock from the outside of thedoor.3. Slide the inside lever onto the inside spindle and secure it with theset screw.4. If you removed the escutcheons from the door, make sure that thecore is positioned properly in the outside escutcheon (EV and FVonly), the escutcheons are aligned properly on the door, and tightenthe escutcheon mounting screws.Note: For a description of lock functions, see page 2–2.5. Turn the levers to check that they operate smoothly.5–2 B.A.S.I.S. G Service Manual