B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Shared Standard and Exit Hardware Trim PartsFIELD REPLACEMENT KITSUnless otherwise noted, each kit contains a quantity of one for eachcomponent indicated.Reader kitsThe reader kits described in the table below are used for both standardB.A.S.I.S. Locks and EX Series Exit Hardware Trim. To determine theread head track position for magnetic stripe readers, see page 9–17. Todetermine the read head track position for dual validation readers, seepage 9–15.ComponentsKit namePart numberMagnetic stripereader assembly (track 1)Magnetic stripereader assembly (track 2)Magnetic stripereader assembly (track 3)Smart cardreader assemblyDual validationreader assembly (track 1)Dual validationreader assembly (track 2)Dual validationreader assembly (track 3)Escutcheon gasketsMoutning plate screwLift finger screwTemporary operator cardMagnetic Stripe Reader (Track 1) Kit 1837869 ■Magnetic Stripe Reader (Track 2) Kit 1833445 ■Magnetic Stripe Reader (Track 3) Kit 1837900 ■Smart Card Reader Kit 1833560 ■Dual Validation Reader (Track 1) Kit 1837984 ■Dual Validation Reader (Track 2) Kit 1838024 ■Dual Validation Reader (Track 3) Kit 1838066 ■†5 ■ ■†5 ■ ■†5 ■ ■†5 ■ ■†5 ■ ■†5 ■ ■†5 ■ ■†. Kit includes one escutcheon gasket for standard B.A.S.I.S. Locks and one escutcheon gasket for EX Series Exit Hardware Trim.4–4 B.A.S.I.S. G Service Manual