B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

Planning the installationContentsThese installation instructions describe how to install yourB.A.S.I.S.® G EX Series (EXG) or B.A.S.I.S. V EX Series (EXBV)Exit Hardware Trim. † B.A.S.I.S. EX Series Exit HardwareTrim is available for use with the following types of exitdevices manufactured by Precision Hardware (1000 Seriesand 2000 Series) and Von Duprin® (98/99 Series): ‡■ rim ■ surface vertical rod■ mortise ■ concealed vertical rod.These instructions cover the following topics:Planning the installation ................................................ 1Preparing the door .......................................................... 2Installing the exit hardware and trim............................ 6Completing the installation..........................................10Site surveyUse the following survey to record information about theinstallation site.Lock informationExit hardware type:❑ Rim❑ Mortise❑ Surface vertical rod❑ Concealed vertical rodLock function:❑ EV–With key override❑ NV–Without key overrideDoor informationDoor handing and bevel:❑ Left-hand reverse bevel (LHRB)❑ Right-hand reverse bevel (RHRB)Door type:❑ Wood❑ MetalDoor thickness: inches (1 3/4″ to 2 1/4″)† The Best Access Systems logo and B.A.S.I.S. areregistered trademarks of Best Lock Corporation.‡ Von Duprin is a registered trademark ofVon Duprin, Inc.Installation Instructions forB.A.S.I.S. EX Series Exit Hardware TrimBEST ACCESS SYSTEMSIndianapolis, IndianaComponents checklistUse the following checklist to make sure that you have theitems necessary to install your B.A.S.I.S. Exit Hardware Trim.Components provided in the box:❑ B.A.S.I.S. escutcheon and lever assembly❑ Battery bracket❑ Battery cover❑ Battery pack❑ Battery screw package❑ Cylinder assembly and related components (for EVfunction only)❑ Cylinder mounting sleeve (for Von Duprin EV functionsonly)❑ Bar code ID sticker (for your records)❑ Temporary operator card❑ Installation template and instructionsOther components (for EV function only):❑ 7-pin core❑ Control keySpecial tools checklistUse the following checklist to make sure that you have thespecial tools necessary to install your B.A.S.I.S. Exit HardwareTrim.❑ T15 TORX® bit driver ††❑ ED211 cylinder wrench (for EV function only)†† TORX is a registered trademark of the CamcarDivision of Textron.1