B.A.S.I.S. G Service Manual [T63300] - Best Access Systems

MaintenanceReinstalling thebackup battery1. Slide the backup battery under the clip and into position in thebattery socket.Battery clipBattery socketBackup batterySlide the backup batteryunder the clip.Outside escutcheonFigure 11.2Reinstalling the backup battery (escutcheon for standard mortise lockshown)2. For standard locks, peel away the protective backing from the edgeof the escutcheon gasket and slide the gasket onto the upperescutcheon post. Press the gasket into place so the electronicsboard is covered.For exit hardware trim, reinstall the following parts in theescutcheon:■ mounting plate (page 10–7)■ lift finger (page 10–5)■ escutcheon gasket (page 10–3)■ mounting standoffs (page 10–2).3. For standard locks, reinstall the inside and outside escutcheons onthe door. For mortise lock instructions, see page 5–6. For cylindricallock instructions, see page 7–8.For exit hardware trim, reinstall the escutcheon on the door. Seepage 8–14.B.A.S.I.S. G Service Manual 11–3