Duality SE Operator's Manual - Solid State Logic

DaWOther useful transport modesHalf-speed PlaybackAbort Current Record PassCycle through Record Modes (Normal, Quickpunch, TrackPunch, Loop)Cycle through Machine Control Masters (accessible via the transport window)Link or Unlink the Edit and TimelinessHIFt + playsHIFt + stOpCtrl + reCOrDCtrl + OnlInesHIFt + / (backslash)setting pre and post roll (15)Hold down alt and press the pre or pOst button to highlight the left hand numeric field of the pre-roll or postrolltime window; the time is displayed on Duality SE’s TFT screen in place of the DAW’s timecode position. The selectednumeric field will flash; use the navigation left/right arrow buttons (16) to select a different numeric field if required, thenenter a value on the numeric keypad (18) or use the up/down arrow buttons (16) to increase or decrease the selected field.Press enter on the numeric keypad (18) to confirm the time. The numeric keypad’s Clr button can be used to clearthe selected time.setting start (In) and end (Out) times (15)Hold down alt and press the In or OUT button to highlight the left hand numeric field of the start or end time window.The time is displayed on Duality SE’s TFT screen in place of the DAW timecode position. The selected numeric field willflash; use the navigation left/right arrow buttons (16) to select a different numeric field if required, then enter a value onthe numeric keypad (18) or use the up/down arrow buttons (16) to increase or decrease the selected field.Press enter on the numeric keypad (18) to confirm the time. The numeric keypad’s Clr button can be used to clearthe selected time.audition (15)This function allows the In, Out, pre and pOst points to be checked. Press the auD button, then press either thepre, In, Out, or pOst button. Press the auD button again to cancel the function.preInOutpOstalt + OptIOn + pre or InPlays from the pre-roll point to the selection start pointPlays from the selection start point for the post-roll timePlays from the end point less the pre-roll time to the end pointPlays from the selection end point for the post-roll timePlays from the selection start point less the pre-roll time to the selectionstart time plus the post-roll timealt + OptIOn + pOst or Out Plays from the selection end point to the selection end point plus post-rolltime.3-28 Duality se V3 Operator’s Manual