Duality SE Operator's Manual - Solid State Logic
Duality SE Operator's Manual - Solid State Logic
Duality SE Operator's Manual - Solid State Logic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DaWthe logic template<strong>Duality</strong> <strong>SE</strong> emulates a Mackie Control unit plus multiple Mackie XT fader expanders. <strong>Logic</strong> will accept the full 48 fadercontrol offered by <strong>Duality</strong> <strong>SE</strong>. The control surface set up should be configured as shown below in the <strong>Logic</strong>Preferences/Control Surfaces menu:<strong>Duality</strong> se logic Control Button layoutWhen compared to the HUI protocol layout, the major changes to buttons in this section are that automation modesreplace the screen display select buttons, and the inclusion of the MarKer and nuDge functions. glOBal uses the8 x 8 menu matrix buttons to select different view options. CHannel is unchanged and assigns <strong>Duality</strong> <strong>SE</strong>’s channel gainelement to the V-pot. The rotary encoder switch is used to ‘flip’ parameters onto the faders, but the encoder itself has nofunction. The dot-matrix display indicates the V-pot mode with a two-character label. Plug-ins are controlled from thechannel V-pots, so there is no longer an ‘EDIT’ select mode for the channel sel button.3-48 <strong>Duality</strong> se V3 Operator’s <strong>Manual</strong>
Change language