Duality SE Operator's Manual - Solid State Logic

DaWthe sonar templateDuality SE emulates a Mackie Control (MCU), plus additional Logic XT fader expanders as required. The Control Surfacesetup menu is located in the Sonar Options menu:To set up the correct mapping of Duality SE faders to DAW channels, select Mackie Control from the Tools menu toaccess the Properties page and the Configure Layout option. Full online operational documentation for the Mackie Controland Expander (XT) functions can be accessed via the PC keyboard F1 key when the Control Surface Properties dialogue isopen.Duality se’s sonar Control Button layoutThe majority of functions are controlled via dedicated buttons, with less reliance than the HUI version on the 8 x 8 menubutton matrix located beneath the screen. The main differences when compared to the HUI front panel are as follows:Different function grouping to assign parameters to the Channel V-pots. CHannel is unchanged and assigns Duality SE’schannel gain element or DAW channel to the V-pot according to the state of the Console Focus button. The encoderswitch is used to ‘flip’ parameters onto the faders as before, but includes all processing parameters, not just send levels. Two‘Flip’ modes are available, Duplicate or Exchange, selected via a single or double press on the encoder switch.For the Sonar template, as with the buttons that control the function of the channel sel button with the HUI protocol,sel and rDy control whether the channel sel button sends the SEL and REC/RDY MIDI codes. eDIt is a dedicatedfunction equivalent to the MCU EDIT/GLOBAL function located in the FADER BANKS section. The display above theencoder shows the two-character plus decimal point Assignment window from the MCU.Duality se V3 Operator’s Manual3-53