Duality SE Operator's Manual - Solid State Logic

total recalltOtal reCall DIsplaysAs mentioned before, individual channels are displayed on the TFT screen in that samebay. To switch from one channel to another within a bay, press the fader status button.In order to provide maximum clarity, the centre section display is split into foursections, all selected by soft key function is the lower row:FaderStatusButtonGrpMstrtBusMCompGroup Control fadersFour Stereo Return channelsTrack Bus Masters and Aux Bus MastersMaster Compressor, Mix Reassign Matrix, Stereo Downmix, FoldbackMasters, Master Fader(s)In all cases, controls that are in different positions from their stored values are highlighted in yellow:Offline trimIt is possible to trim the overall level of a channel fader without affecting any underlying automation data, as described inSection 5. This level is stored in the TR and is displayed in the black box to the left of the TR screen’s fader: the storedOffline Trim level is displayed in the top row and the current level in the bottom. The current value turns green to indicatethat it is above the stored value, and red to indicate that it is below.To manually correct the Offline Trim, press the OFFlIne trIM button in the AUTOMATION group and turn thechannel V-pots.Duality se V3 Operator’s Manual4-5