Duality SE Operator's Manual - Solid State Logic

automationswitch automationPressing any automatable switch (Cut, eQ, Ins (insert), Cue and Fx1 to Fx4) will toggle its state and automatically startwriting data (the rec LED by the fader will light). The switches can be returned to Replay either by rolling back or bypressing the play button on the fader followed by the switch which is in Write. All channel switches can be returned witha double-press of the play button.The states of these channel switches are stored separately from the fader data. Switch data is stored regardless of thecurrent fader status unless the switch has been put into safe mode at the start of the Mix Pass. Whenever a channel orgroup function is in Write, the fader’s rec LED will light.Pressing the fader-based Match button, followed by an automatable switch, drops that switch into Write without changingthe current state of the switch. Match and play are mutually exclusive. If one is active, selecting the alternate functioncancels the first one.using Match and play to correct a switchIf you have pressed a switch in the wrong place, simply move the DAW to a position before the error, put the DAW intoPlay, select Match and press the switch to automatically drop into Write without changing the stored state of the switchat that point (see diagram below for the Cut switch). When the switch operation has been overwritten, select play andpress the switch again to return to the previous automation state.5-16 Duality se V3 Operator’s Manual